Chuanggao
110mm Frame Thermal Break Aluminum Casement Window with Integrated Screen
High-performance 110mm frame thermal break casement window system that combines energy efficiency, structural durability and modern design.
- Excellent thermal insulation
- Superior soundproof performance
- Strong water tightness
- High wind load resistance
The 110 series thermal break aluminum casement window is engineered with advanced multi-chamber insulation technology to reduce heat transfer and improve energy efficiency. It is suitable for residential and commercial projects in various climates.
Why Choose Our Windows?
Energy Efficient
Reduce energy costs up to 30%
Comfortable Living
Keep indoor quiet & cozy all year round
Durable & Reliable
110mm reinforced frame long service lifespan
Customizable Size
Multiple sizes & finishes to meet your needs
| Key Attributes | 110 series thermal break aluminum window |
|---|---|
| Thickness | 1.4mm |
| Frame Width | 110mm |
| Mesh | 0.45mm-15 mesh stainless steel screen mesh |
| Tempered Glass | 5mm+20A+5mm |
| Hardware | Hopo |
| Bettereat insulation | Customized 26mm curtain wall -type large strips. |
| Simple and beautiful | The opening sash adopts an ultra - narrow design. |
| Smooth opening | HOPO 15 - inch high - load - bearing friction hinge. |
| Firm and reliable | pulling and slanting transmission bo. |
Eliminates Thermal Bridging & Poor Insulation
Flaw of standard windows: High thermal conductivity creates thermal bridges, causing energy waste, condensation and frost.Our solution: 110mm multi-chamber frame with PA66GF25 thermal break strip cuts heat transfer by 70%, reaching a U-value as low as 1.4 W/(m²·K).
Boosts Low-Frequency Sound Insulation
Flaw of standard windows: Single-cavity thin profiles perform poorly against traffic and urban noise.Our solution: Reinforced 110mm frame + laminated glazing + full EPDM seal deliver 35–42 dB sound reduction for quiet interiors.
Prevents Seal Aging & Water Infiltration
Flaw of standard windows: Low-grade gaskets harden and leak in 5–8 years, causing drafts, rain seepage and wall mold.Our solution: Dual continuous EPDM sealing system + hidden drainage reach Class 6 water tightness per EN 12208, with 15+ years of reliable performance.
✅ Long-Lasting Fade & Chalking ResistanceFlaw of standard windows: Low-grade powder coating fades, chalks and flakes within 3–5 years under UV exposure, causing rapid deterioration of facade appearance.Our 110 series solution: Standard Qualicoat-certified super-durable polyester powder; optional PVDF fluorocarbon finish delivers 10–20 years of color retention per AAMA 2604/2605 standards.
✅ Reliable Coating Adhesion Without PeelingFlaw of standard windows: Inadequate surface pretreatment and improper curing cause blistering, flaking and coating delamination, leaving bare aluminum exposed to corrosion.Our 110 series solution: Fully automated chromate-free pretreatment line with precise curing control; coatings pass strict cross-cut adhesion tests, eliminating peeling and blistering risks.
✅ Superior Corrosion Protection for Harsh ClimatesFlaw of standard windows: Thin anodic film with poor sealing leads to white spots, pitting and corrosion in coastal, high-humidity or polluted areas.Our 110 series solution: Controlled film thickness with standardized sealing process; passes 1000+ hour neutral salt spray test (ISO 9227), maintaining integrity even in coastal and industrial environments.
✅ Uniform Finish With Strict Color ConsistencyFlaw of standard windows: Manual spraying and loose quality control result in obvious batch-to-batch color difference, orange peel texture and surface dust defects.Our 110 series solution: Automated electrostatic spraying line with ΔE≤2 color difference control; smooth, uniform finish free of orange peel and particle defects for consistent premium appearance.
Are 110mm thermal break windows energy efficient?
Yes. The 110mm multi-chamber frame with PA66GF25 thermal break strip achieves a U-value as low as 1.4 W/(m²·K) with double Low-E glass, cutting heating and cooling costs by up to 40%.
What export certifications do you provide?
Our windows comply with ISO 9001, CE (EN 14351-1) and NFRC standards. We also supply full third-party test reports for thermal, acoustic and wind load performance to meet local building codes.
Can I customize sizes and finishes?
Fully customizable. We support custom dimensions, RAL color powder coating, wood grain finish, various glass types and premium hardware brands to match your project requirements.
What is the typical production lead time?
Standard orders take 25–30 days after drawing confirmation; custom colors or large commercial projects require 40–45 days. We ship via sea freight with reinforced export packaging.
Are these windows easy to install and maintain?
Yes. Windows are pre-assembled and glazed in factory for quick on-site installation. Routine maintenance only requires regular cleaning and annual hardware lubrication, with a 20+ year service life.
What material is the 110 series frame made of?
Primary 6063-T5 aluminum alloy with ≥1.8mm standard wall thickness, paired with Qualicoat-certified super-durable powder coating, resisting corrosion, fading and deformation for long-term use.
